supreme_decolock
Decolock is a highly resistant PVC floor with a stone-like finish. Aesthetic and warm, once the tiles are installed, the joints are almost invisible, giving the sensation of a continuous pavement.
Quick and easy to install thanks to its interlocking system (dovetail), it is enough to fit the tiles together using a rubber mallet, thus reducing costs and installation times.
Apart from being very practical, Decolock is a compact floating floor whose resistance is due to its upper layer of 0.7mm PVC. It is designed for a very high commercial traffic.
Decolock is the self-supporting solution both in renovation projects and in new construction premises.
- PRODUCT INFO -
Properties:
Safety & Aesthetics;
Quick & Easy Installation;
Low Maintenance;
Quick and easy placement without stopping your activity (dovetail system);
Stone-type decorative floating floor with a continuous floor sensation.
Recommended Application:
.Commercial Area
.Shop / Supermarket
.Vehicle
.School
.Hotel
.Raised Floor
Available Size:
.457 x 457mm - (5mm) (THK.)
- INSTALLATION -
.The Decolock tiles can be installed loose-lay on hard surfaces.
.The tiles are cut with a circular saw and installed with a rubber hammer.
.The tiles should not be installed below 15ºC and should be left in the room at least 24 hours prior totheir installation. It is recommended to leave at least a 5mm gap between the tiles and any fixed point.
.It is necessary to glue the areas under direct sun exposure or exposed to important temperature changes.
.The heavy industrial vehicles transit (especially the vehicles equipped with thin and hard wheels) can require the gluing of the tiles on a clean, hard, dry and levelled surface using a two-component PU adhesive.
.If the floor is installed loose-lay, it is recommended to cut the tiles around the heavy machines or racks so that the floor will be free to expand or contract.
.Allow minimum 48 hours before transiting with an industrial vehicle above the glued areas
- MAINTENANCE -
.The Decolock tiles are to be cleaned with water and neutral detergent or degreaser recommended for synthetic floors.
.It is possible to use a single disc washing machine with a light brush or pad (it is recommended to try the brush and the products on a small area before its general use).
.Make sure you clean the floor from aggressive liquids as soon as possible to avoid prolonged contact and maintain its best aspect. If the floor is very dusty, it should be brushed or vacuumed first.
- SHIPPING INFO -
Normally shipping delivery takes around 8-10 weeks from your orders on. If you require any express services, delivery time can be upgraded as 2-4 weeks.
(For any questions, please feel free contact us during business hours for better information.)