polyflor_polysafe verona pur
Polysafe Verona PUR - is a heterogeneous anti-slip vinyl sheeting (R10 / pendulum wet test 36+). Most guaranteed slip resistance product in Hong Kong.
．PURE COLOURS collection features a contemporary decoration in a selection of tonal hues optimised for specification within dementia friendly design schemes, promote harmony and a sense of well-being.
．Tonal colours allows design to meet function, contributing to the creation of soothing interior design schemes. Ideal for use within areas where there is risk of spillage.
．ORIGINAL Polysafe Verona collection achieves a pendulum wet test result of 36+ (slider 96) which is sustainable throughout the product’s guaranteed life.
．High quality, cross-linked polyurethane reinforcement, UV cured for superior cleaning benefits
．BRE Global A+ Rated Product (Certificate No: ENP 472) in major use areas such as healthcare & education
．Polysafe Verona PURE is 100% recyclable through the Recofloor scheme and contains recycled material
．Ideally suited for heavy traffic areas where there are risks of water spillage and other contaminants in commercial and residential areas
- PRODUCT INFO -
Properties:
Carborundum-free safety flooring with contemporary decoration;
18 tonal hues optimised for specification within dementia friendly design schemes Uniform appearance and matt surface finish;
Reinforced with Polysafe PUR for optimum appearance retention;
Sustainable wet slip resistance assured throughout the guaranteed life of the product.
Recommended Application:
．Hospital
．School
．Elderly Residence
．Nursery Room
．Veterinary Centre
．Pet Grooming Salon
Available Size:
．Polysafe Verona PUR - 2 x 20m - (2mm)(THK.) - R10
- PRODUCT RANGE -
- INSTALLATION -
．Solid substrates should NEVER exceed 75% RH unless otherwise stated eg Polysafe QuickLay.
．When installing Polyflor resilient flooring it is ESSENTIAL to apply a cementitious smoothing compound of at least 3mm thickness.
．Never adhere Polyflor floor coverings directly onto a mastic asphalt subfloor.
．Never lay Polyflor resilient flooring over expansion joints.
．Do not use sheets with a moisture content of less than 7% and greater than 14% (when tested using an electrical resistance moisture meter).
- MAINTENANCE -
．Polysafe PUR ranges are designed to resist soiling, which ensures that even after transportation, installation and the period prior to handover, the intensity of construction clean can be significantly reduced. This will have a beneficial impact on the initial costs.
．Remove surface dust and grit by sweeping or vacuum.
． Apply a solution of neutral cleanser (or alkaline cleanser, dependent upon the level of grease or oily contaminants), diluted to the manufacturer’s instructions, with a spray over the section to be cleaned. Leave for sufficient time to react with the soiling.
．Pick up the solution with a clean microfibre mop, using a continuous side-to-side motion. When the mop head becomes loaded, it will start streaking the floor. At this point the dirty mop head should be removed and placed into a laundry bag and a clean mop head fitted. The cycle should then be repeated until the whole floor is completed.
．The dirty mop heads should then be laundered, in preparation for reuse.
．Where detergent residue remains on the floor surface, the area should be rinsed completely with clean, warm water, picked up with a wet vacuum and left to dry thoroughly.
．This maintenance procedure has been designed to optimise the benefits of the Polysafe PUR system – the latest in cleaning technology. The maximum benefits are derived from this system by carrying out this quick and simple procedure on a daily basis and by using clean equipment each time, to maximise dirt pick-up and eliminate streaking.
．More traditional mechanical cleaning methods such as a 165rpm rotary scrubbing machine, deck scrubber or mop and bucket system can be used with the appropriate neutral or alkaline cleanser - full details are available from Polyflor.
．In areas subject to heavy soiling, machine scrubbing should be undertaken on a periodic basis, after neutral or alkaline cleanser has been applied to the floor, diluted to the manufacturer’s instructions.
- SHIPPING INFO -
Normally shipping delivery takes around 8-10 weeks from your orders on. If you require any express services, delivery time can be upgraded as 2-4 weeks.
(For any questions, please feel free contact us during business hours for better information.)
