polyflor_polysafe APEX 55
Polysafe Apex 55 - is a safety vinyl flooring range combining the assurance of sustainable wet slip resistance with high durability for years of performance in extreme, heavy footfall commercial areas.
．Available with enhanced slip resistance, the range features a concentrated level of safety aggregates in the vinyl to ensure underfoot safety. ．Provides low slip potential in busy commercial kitchens and food processing areas where oil and grease are regular contaminants.
．Specially designed with enhanced levels of sustainable slip resistance for use in the more extreme and intensive food production and processing areas where there are risks of high viscosity contaminants.
．Standing the toughest of tests, Apex is suitable for use in busy kitchen environments whether commercial, gourmet or food preparation areas where over 100 meals and covers are served daily and where the floor is subjected to everyday spillages such as cooking oil, margarine and grease. Such as hospitals, schools, hotels, restaurants and fast food establishments.
- PRODUCT INFO -
Properties:
Surface roughness Rz 70µm + for use in heavy-duty and intense footfall areas where risk of high viscosity contamination such as oil and grease are present;
Quartz crystals, aluminium oxide and silicon carbide particles incorporated through the vinyl to improve traction and safety underfoot;
Sustainable wet slip resistance assured throughout the guaranteed life of the product;
R12 rated product, 55+ Pendulum Test.
Recommended Application:
．Hospital
．School
．Community Centre
．Washroom
．Shop / Supermarket
．Hotel
．Exhibition / Display Area
．Fast Food Chain
．Cafe Shop
．Food Preparation Area
．Prison
．Cold Room
Available Size:
．Polysafe Apex - 2 x 15m - (3mm)(THK.) - R12
- PRODUCT RANGE -
．
- INSTALLATION -
．A moisture test must be carried out to ensure that the subfloor has dried out to a level consistent with the application of vinyl flooring. The test should be carried out using a hygrometer, in accordance with the instructions in BS 8203. The result should not exceed 75%RH, once equilibrium has been achieved.
． The adhesive used must be approved by Polyflor, to ensure full product compatibility.
．Products must be fully conditioned to the environment in which they are to be installed, as outlined by Polyflor.
．Installation must be carried out in accordance with BS 8203 and the instructions of Polyflor.
．All joints must be welded to produce hygienic, continuous floors.
． Suitable for use with underfloor heating up to 27°C. See Polyflor Technical Information Manual for details.
- MAINTENANCE -
．Sweep, mop sweep or dry vacuum the floor to remove dust, grit and debris.
．Apply a solution of alkaline cleanser, diluted to the manufacturer’s instructions, to the floor and leave for sufficient time to react with the soiling.
．Using a 165 rpm rotary machine fitted with a rotary scrubbing brush or, if necessary, a scrubbing pad, machine scrub the floor and then pick up the slurry with a wet vacuum. Rinse the floor thoroughly with clean, warm water, pick up with a wet vacuum and leave to dry thoroughly.
． For small areas, where there is no suitable scrubbing machine available, a deck scrubber should be used in conjunction with a wet vacuum or mop and bucket system.
．For very heavy soiling, dilution rates above the manufacturer’s minimum recommendations may be necessary.
- SHIPPING INFO -
Normally shipping delivery takes around 8-10 weeks from your orders on. If you require any express services, delivery time can be upgraded as 2-4 weeks.
(For any questions, please feel free contact us during business hours for better information.)
