top of page

polyflor_palettone

Polyflor-1380x400.png

Palettone - enables you to bring a unique style and elegance to any commercial environment. Available in sheet in a palette of 50 contemporary colours, ranging from pale neutrals to more intense shades, and features a solid colour base with complementary toned highlights. 

 

Each shade of this range has its own unique NCS reference for use as a guide whilst exploring bespoke design schemes.

features a high quality, cross-linked polyurethane reinforcement, UV cured to provide a low-cost polish free maintenance regime for the lifetime of the flooring.

Demonstrate outstanding durability and abrasion resistance. Palettone PUR achieves the highest abrasion wear rating Group T (EN 660 Part 2), EN ISO 10581 Type I.

Achieves a Generic A+ rating in major sectors such as health, education and retail.

100% recyclable and contains 25% recycled material. Ideally suited for heavy traffic areas, Palettone PUR is recommended for use throughout commercial interiors, healthcare and education facilities, as well as retail outlets.

-  PRODUCT INFO  -

Properties:

Full conformance with the requirements of EN 649/EN ISO 10581;

Flexible pvc sheet flooring in 2mm thickness;

Use area classification 23/34/43 as defined in EN 685/EN ISO 10874;

Ideally suited for heavy traffic areas.

Fully tested to EN 13501-1 in respect of flamespread;

For slip resistance, classified DS to EN 13893, R10 slip resistance;

Recommended Application:

.Hospital

.School

.Community Centre

.Washroom

.Shop / Retail

.Exhibition / Display Area

.Cafe Shop

Available Size:

.Palettone - 2 x 20m - (2mm)(THK.)

-  PRODUCT RANGE  -

-  INSTALLATION  -

.A moisture test must be carried out to ensure that the subfloor has dried out to a level consistent with the application of vinyl flooring. The test should be carried out using a hygrometer, in accordance with the instructions in BS 8203. The result should not exceed 75%RH, once equilibrium has been achieved.

 

. The adhesive used must be approved by Polyflor, to ensure full product compatibility.

 

.Products must be fully conditioned to the environment in which they are to be installed, as outlined by Polyflor.

 

.Installation must be carried out in accordance with BS 8203 and the instructions of Polyflor.

 

.All joints must be welded to produce hygienic, continuous floors.

 

. Suitable for use with underfloor heating up to 27°C. See Polyflor Technical Information Manual for details.

-  MAINTENANCE  -

Initial Construction Clean

.Remove all loose debris.

.Ensure that all traces of adhesive are removed from the surface of the floorcovering.

.Mop sweep or vacuum to remove dust and grit.

.Damp mop with a neutral detergent.

 .If required, dry buff with 1000 rpm plus rotary machine fitted with a suitable clean pad and/or scrubber dryer. Rinse with clean water and allow floor to dry.

Daily

.Mop sweep or vacuum to remove dust and loose dirt.

.If required, spot mop to remove stubborn marks, with a neutral cleanser.