polyflor_bloc pur
Bloc PUR - gives you that extensive choice to create tonal, complementary or harmonious interior design schemes through the availability of a broad spectrum of 16 enticing colours.
．Fully pigmented solid colour sheet vinyl;
．Create tonal, complementary, or harmonious design scheme;
．Polyurethane (PUR) surface treatment to assist ongoing maintenance.
- PRODUCT INFO -
Properties:
Heavy duty sheet flooring;
Single solid colours with textured emboss;
Low VOC emissions;
Low cost, polish-free maintenance;
Retail & leisure interiors.
Recommended Application:
．Community Centre
．Education
．Commercial
．Retail Store
Available Size:
．Bloc PUR - 2 x 20m - (2mm)(THK.)
- INSTALLATION -
．A moisture test must be carried out to ensure that the subfloor has dried out to a level consistent with the application of vinyl flooring. The test should be carried out using a hygrometer, in accordance with the instructions in BS 8203. The result should not exceed 75%RH, once equilibrium has been achieved.
．When installing Polyflor resilient flooring it is ESSENTIAL to apply a cementitious smoothing compound of at least 3mm thickness.
．Never adhere Polyflor floor coverings directly onto a mastic asphalt subfloor.
．Installation must be carried out in accordance with BS 8203 and the instructions of Polyflor.
．All joints must be welded to produce hygienic, continuous floors.
．Suitable for use with underfloor heating up to 27°C. See Polyflor Technical Information Manual for detail.
- MAINTENANCE -
Initial Maintenance
． Remove all loose debris.
． Ensure that all traces of adhesive are removed from the surface of the floor covering.
． Mop sweep or vacuum to remove dust and grit.
． Apply a solution of neutral cleanser (or alkaline cleanser, dependent upon the level of grease or oily contaminants), diluted to the manufacturer’s instructions, with a spray over the section to be cleaned. Leave for sufficient time to react with the soiling.
Routine Maintenance
．Assess the appearance of the floor. Undertake the following as required: Light scuffing — dry buff with a 1000 rpm plus rotary machine fitted with a suitable clean pad.
．Heavier scuffing — spray clean using a floor maintainer and 1000 rpm plus rotary machine fitted with a suitable clean pad.
Periodic Maintenance
．Assess the appearance of the floor. If the floor has dirt build–up, machine scrub with a scrubber dryer (approx. 165 rpm) fitted with a suitable clean pad, using a neutral or alkaline detergent, as appropriate.
- SHIPPING INFO -
Normally shipping delivery takes around 10-12 weeks from your orders on. If you require any express services, delivery time can be upgraded as 2-4 weeks.
(For any questions, please feel free contact us during business hours for better information.)
